Leader in Lamination Tooling Since 1977
Making A World Of Difference

Lamination Tooling

TADCO Tight Tolerance (TT) Tooling™

TADCO TT™ Tooling offers similar benefits to TADCO's Super Tooling™, but allows for field replaceable bushings while retaining an extremely tight tolerance.  TADCO's exclusive technology precisely controls hole to hole locations.  TT™ Tooling can use standard bushing configurations as well as special Super Tooling-style pins and bushings.

 

SPECS:

AISI 4140
Standard

Hardness: 36/40 Rockwell C
Parallelism: Within .001" TIR
Flatness: .005"/ft.
Hole-to-Hole Location: ±.0005"
Surface Finish: #32 RMS
Thickness: .375" ±.002" / 10mm
Expansion Factor (TCE/CTE): 12.1 x 10' per C°
Plate Size: +1/16" - 0

TADCO Super Tooling™

TADCO's Super Tooling™ offers extremely precise close tolerance tooling for applications requiring extra tight control.  Bushing replacement for Super Tooling™ is done at our factory to hold the extra tight tolerances.  Super Tooling™ is packaged with a special hole design, then coupled with custom finished tight tolerance pin and bushings.

SPECS:

AISI 4140
Standard

Hardness: 36/40 Rockwell C
Parallelism: Within .001" TIR
Flatness: .0025"/ft.
Hole-to-Hole Location: Up to ±.00025"
Surface Finish: #32 RMS
Thickness: .375" ±.002" / 10mm
Expansion Factor (TCE/CTE): 12.1 x 10' per C°
Plate Size: +1/16" - 0

Lamination Tooling & Transport Plates

TADCO's strict adherence to quality standards and exclusive use of custom alloys makes a world of difference when producing tough multillayer PCB's. Every order of tooling plates comes with a Coordinates Measuring Machine Report and Certificate of Compliance traceable to MIL standards. In addition, TADCO can manufacture Lamination and Transport Plates for any press system; both manual and automatic load and unload. TADCO's spercialized knowledge of the PCB lamination processes as well as metallurgical and heat treating sciences combined with highly graded steel alloys allows us to produce the finest tooling available today.

SPECS:

AISI 4140
Standard

Hardness: 36/40 Rockwell C
Parallelism: Within .001" TIR
Flatness: .005"/ft.
Hole-to-Hole Location: ±.001"
Surface Finish: #32 RMS
Thickness: .375" ±.002" / 10mm
Expansion Factor (TCE/CTE): 12.1 x 10' per C°
Plate Size: +1/16" - 0